well here it is... old v-drive speed boat a lil bit about whats in it this is my first big block so i dont know too much about it guy said it should be around 660hp but who knows... i pulled the carb and the numbers come back as a 750? and the block numbers come back as a 454?  but im guessing you can destroke it?

4bolt main block bored 30 over (433inches)
stock stroke forged GM crank, SFI approved balancer and flexplate
11:1 forged TRW pistons, 7/16" stock rods
GM iron heads w/2.25 intake and 1.90 exhaust valves (stainless steel)
chambers are polished, ports are matched to intake/exhaust manifolds
exhaust is log style built for turbo motors (good flow)
1050 holley dominator carb (flows +/- 1200cfm) w/1" phenolic spacer on dart intake
HEI distributer w/Accel super coil kit
Harland Sharp roller rockers w/poly locks & 7/16 pushrods
Lunati cam (pn#40212)and lifters (solid flat tappet)
cam specs: (from the Lunati site)
Advertised Duration (Int/Exh): 305/314
Duration @ .050 (Int/Exh): 265/271
Gross Valve Lift (Int/Exh): .592/.598
LSA/ICL: 109/107
Valve Lash (Int/Exh): .030/.032
RPM Range: 4000-7600

---

Sweet! Yup, a lot more HP than my boat!

Chris

lol im trying to get it going for labor day weekend thinking about going to eufaula... currently getting the gas tanks sand blasted since they sat for about 3 years... but if im not out on the boat ill definately be out on these

---

Nice also. =)

Chris

thanks... when you gonna come test drive it lol

I bet it's a blast to drive!