Altus Racing and ChevySpeed | |
http://www.chevyspeed.com/cgi-bin/yabb2/YaBB.pl
Drag Racing >> Technical Forum >> Project Super Nova Hood Install http://www.chevyspeed.com/cgi-bin/yabb2/YaBB.pl?num=1158783404 Message started by Jared Black on 09/20/06 at 15:16:42 |
Title: Project Super Nova Hood Install Post by Jared Black on 09/20/06 at 15:16:42
My new Harwood hood arrived a couple weeks ago.
Here are some pics from the install. Jared |
Title: Re: Project Super Nova Hood Install Post by Jared Black on 09/20/06 at 15:17:34
I just ordered the kit with all the fasteners and brackets included.
|
Title: Re: Project Super Nova Hood Install Post by Jared Black on 09/20/06 at 15:19:02
After measuring out the spacing, I mounted the brackets.
|
Title: Re: Project Super Nova Hood Install Post by Jared Black on 09/20/06 at 15:19:45
Next, I had to notch out the sides of the hood for the brackets.
|
Title: Re: Project Super Nova Hood Install Post by Jared Black on 09/20/06 at 15:20:41
I also had to trim some of the cowl area to that it would sit flush on the brackets.
|
Title: Re: Project Super Nova Hood Install Post by Jared Black on 09/20/06 at 15:24:59
Once I was happy with the position and fit, I measured and drilled out the holes for the dzus fasteners.
I used a stepped, or cone shape drill bit. This had the exact slope of counter sink that I needed for the fasteners to sit flush. |
Title: Re: Project Super Nova Hood Install Post by Jared Black on 09/20/06 at 15:28:39
2nd view w/ the fasteners installed.
|
Title: Re: Project Super Nova Hood Install Post by Jared Black on 09/20/06 at 15:30:06
The final step was to install the trim piece.
It actually took more time and work than expected. I had to do some additional trimming to get everthing to fit correctly. |
Title: Re: Project Super Nova Hood Install Post by Jared Black on 09/20/06 at 15:30:39
Finished views.
|
Title: Re: Project Super Nova Hood Install Post by Jared Black on 09/20/06 at 15:30:52
2
|
Title: Re: Project Super Nova Hood Install Post by Chris Smith on 09/20/06 at 16:43:05
Looks great!
Good job. Chris |
Title: Re: Project Super Nova Hood Install Post by Jared Black on 09/21/06 at 11:00:27
Thanks Chris!
;) JB |
Title: Re: Project Super Nova Hood Install Post by robzridez on 09/21/06 at 13:57:03
looks good Jared. I forgot about that front trim piece. It should give the hood some added support in the front to make up for not having any fasteners in the front.
|
Title: Re: Project Super Nova Hood Install Post by Jared Black on 09/27/06 at 10:32:52
I think so too, it's pretty sturdy- doesn't flex much.
JB |
Altus Racing and ChevySpeed » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |